Designed to be punchy and detailed with a larger-than-life sound, the Kickball delivers an acoustic balance far superior to conventional dynamic microphones.
The back of the mic features a three-position bass frequency switch allowing three distinct low-frequency equalization curves. This circuit is based on a unique active RC filter that attenuates sub-bass (below 20Hz) frequencies and contours the low end without any noticeable phase distortion. Ideal for both stage and studio use, the Kickball can be used on virtually any instrument: kick drum, snare drum, tom toms, electric bass, bass cabinets, and anywhere else you need a rugged mic that sounds unlike anything you’ve ever heard before. And like any good kick drum microphone, the Kickball can withstand extremely high sound pressure levels that would send even the toughest condensers back to the showers.
Give the Kickball a listen and you’ll see how well-rounded it really is.
Specifications
- Transducer Type: Active Dynamic
- Polar Pattern: Cardioid
- Frequency Response: 35 Hz – 16 kHz
- Sensitivity: 3.0 mV/Pa at 1 kHz (1Pa = 94 dB SPL)
- Output Impedance: 50Ω
- Rated Load Impedance: Not less than 2kΩ
- Maximum SPL: 162 dB SPL (2kΩ, 1.0% THD)
- S/N Ratio: 76 dB-A (IEC 651)
- Noise Level: 18 dB-A (IEC 651)
- Dynamic Range: 144 dB (@ 2.0kΩ)
- Power Requirement: +48V DC Phantom Power (IEC 268-15)
- Weight: 440g
- Dimensions: 325mm (circumference)
Frequency & Polar Response Charts
