Audio-Technica AT3032

Audio-Technica AT3032 Description

The low-profile AT3032 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. Known for its flat, extended frequency response and wide dynamic range, the AT3032 handles high SPLs with ease. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. Its low self-noise (16 dB SPL) is perfectly suited for the most sophisticated recording equipment.

• Outstanding performance and versatility
• High max SPL and wide dynamic range
• Omnidirectional polar pattern preserves “sound” of the recording location, delivers flat response and freedom from proximity effect
• Low self-noise (16 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
• Flat, extended frequency response
• Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad

Specifcations:

• ELEMENT: Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN: Omnidirectional
• FREQUENCY RESPONSE: 30-20,000 Hz
• LOW FREQUENCY ROLL: -OFF 80 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY: -34 dB (19.9 mV) re 1V at 1 Pa
• IMPEDANCE: 250 ohms
• MAXIMUM INPUT SOUND LEVEL: 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
• NOISE: 16 dB SPL
• DYNAMIC RANGE: (typical) 132 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO: 78 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS: 11-52V DC, 3 mA typical
• SWITCHES: Flat, roll-off; 10 dB pad (nominal)
• WEIGHT: 4.1 oz (116 g)
• DIMENSIONS: 5.67" (144.0 mm) long, 0.83" (21.0 mm) maximum body diameter
• OUTPUT CONNECTOR: Integral 3-pin XLRM-type
• ACCESSORIES FURNISHED: AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; soft protective pouch
• AUDIO-TECHNICA CASE STYLE: S1