Audio-Technica ATM35cW

Terminated with locking 4-pin connector for A-T UniPak™ body-pack wireless transmitters. 55" (1.4 m) cable. Includes AT8418 instrument mount for brass, reeds, drums, etc.

Features:

• Clips to brass, reeds, piano, acoustic bass, snare and toms
• Crisp, clear, well-balanced response, even at high SPLs
• Interchangeable elements available for hypercardioid and subcardioid polar patterns
• UniMount® clip permits accurate positioning while protecting element
• Operates on battery or phantom power
  

SPECIFICATIONS

• ELEMENT Fixed-charge back plate, permanently polarized condenser
• POLAR PATTERN Cardioid
• FREQUENCY RESPONSE 30-20,000 Hz
• LOW FREQUENCY ROLL-OFF 150 Hz, 12 dB/octave
• OPEN CIRCUIT SENSITIVITY -45 dB (5.6 mV) re 1V at 1 Pa
• IMPEDANCE 200 ohms
• MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
• DYNAMIC RANGE (typical) 118 dB, 1 kHz at Max SPL
• SIGNAL-TO-NOISE RATIO 67 dB, 1 kHz at 1 Pa
• PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
• BATTERY TYPE 9V
• BATTERY CURRENT / LIFE 1 mA / 1000 hours typical
• SWITCH On-flat, on-roll-off (phantom) Off, on-flat, on-roll-off (battery)
• WEIGHT (MICROPHONE) 0.3 oz (8.5 g)
• WEIGHT (POWER MODULE) 5.4 oz (153 g)
• DIMENSIONS (MICROPHONE) 1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter
• DIMENSIONS (POWER MODULE) 3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D
• OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
• CABLE 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module
• ACCESSORIES FURNISHED AT8418 UniMount® instrument mount; AT8532 power module; soft protective pouch
• AUDIO-TECHNICA CASE STYLE M12