The Shure UA500 is a remote mount antenna kit for the UHF 1/2 wave antenna. The UA500 lets you mount a receiver antenna away from the receiver and closer to the transmitter antenna, improving RF performance. When locating an antenna away from the receiver, the UA820A 1/2 wave antenna must be used. (Do NOT use 1/4 wave antennas.) For best…

Rack hardware for dual ULX Receiver, P4M, P4T, DFR11EQ5, DP11EQ, SCM262 or SCM268 NOTE: If you are mounting a Shure unit with a metal chassis, use the 1/4 inch screws, if you are mounting a Shure unit with a plastic chassis, use the 1/2 inch screws.

Antenna Cable 2FT - Coaxial Cable BNC-BNC, RG58C/U type, 2 foot (0.6m).

6ft Antenna Cable ULX - Remote Antenna Extension Cable BNC-BNC, RG58C/U type 6 foot (2m).

Remote Antenna Extension Cable BNC-BNC, RG8X/U type 25 foot (7.5m). Compatible with ULXS4, ULXP4, UC4, U4S and U4D.

The Shure UA830 is a low-noise, in-line antenna amplifier. The UA830 is intended for remote-mounting antennas to a Shure Model U4 or ULX receiver or Model UA845, or UA844M distribution amplifier in a large installation, effectively shortening the distance from the transmitters. The unit receives power through its output port from the Shure receiver or distribution amplifier. When an antenna…

The Shure UA830 is a low-noise, in-line antenna amplifier. The UA830 is intended for remote-mounting antennas to a Shure Model U4 or ULX receiver or Model UA845, or UA844M distribution amplifier in a large installation, effectively shortening the distance from the transmitters. The unit receives power through its output port from the Shure receiver or distribution amplifier. When an antenna…

The following units are compatible with the WA593: P2T P4T P4M ULXS4 ULXP4 SCM262 SCM268 DFR11EQ DP11EQ Setup Instructions: 1. Attach the handle to either of the two supplied brackets, as illustrated in Figure 1. 2. Choose which of the two units will be on top and which will be on the bottom and begin with the bottom…

Rack tray for up to two T4G, T4N, T4V and UT4 receivers. Also use the URT with Shure P6T and EP6T Transmitters and PA760 and PA765 Antenna Combiners.

Instrument cable connects the T1, UT1, SC1, LX1, ULX1, UC1 and U1 body-pack transmitter to a guitar or other instrument. 2.5 foot (1.2 m) length 4-Pin Mini-Connector (TA4F) to XLR FEMALE

ULX Wireless Professional Dual Handheld System with Two ULXP4 Diversity Receivers and Two Beta 58A Handheld Mics with ULX2 Transmitters.p>