0151 448 2080
Order by phone - Mon-Fri: 9:00AM-6:00PM

Select CurrencyYour Basket 0 items | £ 0.00 Checkout

Summer Savings! Check Out All The Offers In The Dolphin Sale

Neumann TLM 49

Dolphin id:
14336
Product SKU:
08550

Call for availability: 0151 448 2080

Studio microphone with Retro look. Warm sound, optimized for vocal recordings.

Show full description »

The TLM 49 is a large-diaphragm studio microphone with a cardioid directional characteristic and a warm sound which is especially optimized for vocal performance. It is supplied as a set, with an elastic suspension.

The design is inspired by that of the legendary M 49 and M 50 microphones of the 1950s. Naturally the TLM 49 has the typical Neumann fine matte nickel finish. The “sound design” is also oriented toward that of the M 49 and the U 47.

By combining its retro look with proven Neumann transformerless circuit technology, this microphone ensures low self-noise and the use of high gain levels.

Applications

During the development phase, the sound was adjusted in extensive practical tests, so as to make the TLM 49 ideal particularly for vocal and speech recording. However, in addition, it is also suitable for instrumental applications in professional production studios and demanding home recordings.

Polar pattern

The large-diaphragm capsule of the TLM 49 provides a cardioid directional characteristic with a tendency toward supercardioid, due to the special capsule construction. Following the example of the M 49, high frequencies are more directional. The capsule diameter is 34 mm.

The front of the microphone is indicated by the red Neumann logo on the microphone body. The capsule is oriented so that the microphone is addressed from the front.

Acoustic features

The TLM 49 uses the famous K 47 capsule, which was also used in the M 49 and the U 47. The capsule has a linear frequency response up to the upper mid-range. Above 2 kHz there is a gentle presence boost up to 3 dB.

The capsule is enclosed by a large microphone headgrille, which is acoustically very open and is hence neutral with regard to the sound.

Electrical features

The letters TLM stand for “transformerless microphone”. With TLM technology the usual output transformer is replaced by an electronic circuit.

As with traditional transformers, it ensures good common mode rejection, and prevents RF interference that may influence the balanced audio signal.

Noise signals which affect the balanced modulation line are therefore effectively suppressed. The microphone can operate at sound pressure levels of up to 114 dB without distortion, and provides a dynamic range of 102 dB (A-weighted).

Operational safety

The entire interior structure is mounted elastically, to prevent the transmission of structure-borne noise. In addition, the capsule is mounted with a rubber shock mount.

Due to the wide frequency response, the TLM 49 can also transmit extremely low-frequency signals without coloration. Of course this means that the microphone is also sensitive to noise signals such as vibration noise and wind noise in this frequency range. The TLM 49 is therefore supplied with the elastic suspension EA 3, which effectively protects the microphone from structure-borne noise. If the microphone is addressed at extremely close range, pop screen PS 15 or PS 20 a can be used in front of the microphone to provide protection against plosive sounds.

Features

  • Sound profile optimized for vocal performance
  • Pressure gradient transducer with the large-diaphragm capsule of the legendary U 47
  • Cardiod characteristic
  • Retro design
  • Transformerless output circuitry
  • Acoustically very open wire mesh headgrille
  • Complete set with elastic suspension

Technical Data

  • Acoustical operating principle: Pressure gradient transducer
  • Directional pattern: Cardioid
  • Frequency range: 20 Hz ... 20 kHz
  • Sensitivity at 1 kHz into 1 kohm: 13 mV/Pa
  • Rated impedance: 50 ohms
  • Rated load impedance: 1000 ohms
  • Equivalent noise level, CCIR1): 23 dB
  • Equivalent noise level, A-weighted1): 12 dB-A
  • Signal-to-noise ratio, CCIR1): (rel. 94 dB SPL) 71 dB
  • Signal-to-noise ratio, A-weighted1): (rel. 94 dB SPL) 82 dB
  • Maximum SPL for THD < 0.5 %2): 110 dB
  • Maximum SPL for THD < 5 %2): 129 dB
  • Maximum output voltage for THD: < 5% -1 dBu
  • Dyn. range of the mic. amplifier /A-weighted, 0.5 %2)): 98 dB
  • Dyn. range of the mic. amplifier /A-weighted, 5 %2)): 117 dB
  • Supply voltage (P48, IEC 61938): 48 V ± 4 V
  • Current consumption (P48, IEC 61938): 3.2 mA
  • Matching connector: XLR 3F
  • Weight: 825 g
  • Diameter: 78 mm
  • Length: 165 mm

1 According to IEC 60268-1; CCIR-weighting according to CCIR 468-3, quasi peak; A-weighting according to IEC 61672-1, RMS

2Measured as equivalent el. input signal

£ 1,189.00 Web price, inc VAT

Ex Vat:
£990.83, VAT at 20.00%
Select Currency
Order
x £ payments + £ deposit
Read more about finance here.
Image: Neumann TLM 49

Free Delivery*

Call for availability: 0844 815 0888

FREE NEXT DAY DELIVERY*
More details on UK deliveries.
More details on International deliveries.

Neumann TLM 49 videos

There are currently no videos for this product. If you are registered with us you may log in to add additional videos related to this product. You can also register an account to add a related video.

Neumann TLM 49 Reviews

There are currently no reviews for this product.

Add your review
Security code
Price Matching

Dolphin Music brings you the best music gear at the best price. We are committed to superior customer service and have extensive product knowledge. However, in today’s market we may not always be aware of all the price fluctuations of the products we sell. So, we offer competitive price matching.

Please fill in the following form to request a price match.

What prices we will match?

We will compare prices for new, direct from manufacturer items, excluding any add-ons, options, or other special features which may affect price.

The item must be new and must be the exact same make and model (ie, the same size, version, etc.).

Since our postage charges are lower than most of the shops, the comparison price must be a "delivered cost" to the consumer.

If we are unable to verify the previous condition, we will notify you that we require additional information to verify the Price Match request. Our goal is to make this policy simple and hassle-free. We are committed to responding to your requests quickly.

The price you have found must be the Internet Retailer's regular, advertised price for a current and available item. The price you found cannot be a closeout, discontinued, blemished, year-end, inventory reduction, or any other type of advertised sale price.

Price Matching requests may not be combined with any other promotional discounts, specials or other price incentives.

Prices and price sources you have found which do not meet the above criteria or in which incomplete or inaccurate information is provided to us, will not be approved for our Price Match.

Please select your country/region

Choose the region you are shopping from to view products in your currency.

We have temporarily suspended processing of EUR payments, all orders will be charged in GBP.