The Alpha-DST Gives You A Multitude Of Design Possibilities.
The Alpha-DST Kit is designed primarily for rooms with a floor square footage of <100 ft/sq. The shortest room dimension should be 6-8 feet. Includes: (32) DST-112s; (32) DST 114s; (4) LENRD-DST Bass Traps; (3) TubeTak Pro Adhesive
Fresh off the success of our best-selling Alpha 1 Acoustic kit, Auralex introduces the sleek, new Alpha-DST Roominators Kit. Not only will the Alpha-DST take the guesswork out of acoustics, but it also improves the sound of everything you record!
Now you can actually hear (and record) ONLY the source and NOT what's bouncing off the walls and ceiling. You'll achieve better sound out of your existing equipment and get more enjoyment out of your room!
The Alpha-DST gives you a multitude of design possibilities and is available in 3 color combinations.
- 32 - DST-112s
- 32 - DST 114s
- 4 - LENRD-DST Bass Traps
- 3 - TubeTak Pro Adhesive
DST Panels and LENRD Bass Traps can be mounted to standard drywall with the included EZ-Stick Pro Tabs.
Be advised that the EZ-Stick Pro Tabs are designed for permanent installations and will damage drywall and painted surfaces when removed.
DST-112 and DST-114 panels use 2 EZ-Stick Pro Tabs each.
DST-LENRDs uses 4 EZ-Stick Pro Tabs each.
Mark the target position on your wall or ceiling where the product will be mounted using small pencil marks, pieces of masking tape or any similar method.
Be sure the surface where the EZ-Stick Pro Tabs will adhere is free of dirt, dust or other oily contaminants by spot cleaning with rubbing alcohol. Remove one of the release layers on the EZ-Stick Pro Tabs and affix it to the rear side of the products perimeter, usually near the corners. Apply firm pressure and wait about 5 minutes for the adhesive to set. Remove the second layer of the release paper from each of the
EZ-Stick Pro Tabs, carefully orient the panels position prior to contact with the wall, then press in place with moderate pressure
DST-112 & DST-114 panels reduce mid-high frequency reflections, flutter echo, room ring and excessive reverberation. To maximize performance in a project studio or control room, consider placing the panels at the first reflection points located to the sides, front, rear and ceiling above your listening position. To maximize performance in a live room, consider spacing the panels evenly throughout the room and staggering treatment across parallel surfaces.
DST-LENRD: Low End noise Reduction dEvicE
DST-LENRD Bass Traps are designed for the 90 degree corners of a room. To increase performance, place them vertically between adjacent
walls and horizontally between a wall and the ceiling