0151 448 2080
Order by phone - Mon-Fri: 9:00AM-6:00PM

Select CurrencyYour Basket 0 items | £ 0.00 Checkout

FREE NEXT DAY DELIVERY* - INSTANT 0% FINANCE AVAILABLE - BUY NOW PAY LATER

Mackie PPM 808M

Dolphin id:
35687
Product SKU:
090-065-91

Call for availability: 0151 448 2080

1200-watt Mono 8 Channel Powered Mixer

Show full description »

The point of a powered mixer is power, right? That's why there are real FR Series High-Current amplifiers inside every Mackie PPM® Series mixer. They crank out real wattage at any impedance, sound good even when pushed into clipping, and are legendary for their reliability.

We also built in the industry's first 32-bit digital EMAC™ effects contained in a powered mixer. Developed specifically for PPM mixers, our EMAC is equivalent to many outboard effects processors, and offers 16 user-controllable, stunning effects. And since graphic equalizers are always in a powered mixer's output path, we insanely over-engineered ours with expensive, discrete components, eliminating the phase distortion that plagues our competitors.

BUILT Like Only Mackie Can

The PPM 808M has everything you'll need for the gig. Each of the six mono channel strips feature XLR mic and 1/4" TRS line inputs, TRS insert jacks, monitor and effects send, 3-band EQ, and an input Trim control with individual level-set LEDs. And you wont need external effects, thanks to our EMAC 32-bit precision digital effects processor—which sounds great and is as easy to use as a stompbox. There's even an Effects to Monitor control, so you can give your stage monitors a "wet" mix, totally independent of the Mains. The output section boasts two of our 600-watt FR (Fast Recovery) power amps, dual 9-band graphic equalizers, 75Hz rumble reduction filters, a switchable soft-knee compressor, and output level metering.

Clean, Articulate Mixing

Above all else, the PPM Series mixers sound great. Often copied, but seldom duplicated, our high-headroom, low-noise mic preamps are legendary the world over for their superior sound quality. That's why we use them in the PPM Series—clean, quiet, superb. Each preamp channel has its own input Trim control, which provides up to 40dB microphone gain, 20dB line-level gain, or a full 20dB of attenuation to "pad" those really hot signals. Channels also feature level-set LEDs for easy visual input gain adjustment—just speak, sing, or yell into the mic and adjust the Trim control until the little green LED blinks. Time to dial in a little channel EQ…

Active 3-Band Equalization

Speaking of "fuzzy-box" manufacturers, we never limit your equalization options to bass and treble. All PPM® Series mixers feature our no-crosstalk, phase-accurate, 3-band EQs on each channel, with usable center frequencies as follows: 12kHz shelving high-frequency EQ (±15dB), 2.5kHz peaking mid-frequency EQ (±12dB), and 80Hz shelving low-frequency EQ (±15dB).

Even More Features...

The PPM's onboard phantom power supply means you can use high-quality condenser microphones, as well as your favorite dynamic mics. Outputs include a 1/4" TRS mixer line output, a 1/4" TRS monitor line output, and left and right RCA tape/line outputs. And because we know you don't want to give up an entire channel (or two) for a CD player, we've provided RCA Tape In jacks, with a dedicated level control, for your favorite external playback device (tape, CD, iPod, etc.).

Possibly the most important feature on the PPM Series mixers is our ingenious Break switch, which mutes channels 1-6, but allows whatever is connected to the Tape inputs to be heard. You'll be glad you set this switch when some drunk yahoo jumps on stage during the break, and rips into "Stairway to Heaven."

Onboard 32-Bit Digital Effects

The pièce de résistance of our PPM Series is its onboard EMAC™ 32-bit digital effects processor, which offers a plethora of dynamic digital effects. You can select any one of 16 custom-designed algorithms ranging from small room reverb to "out-of-this-world" phase shifting—and they're all controllable and easy to operate. Both the Monitor Master and Main Master rotary controls have corresponding EFX controls, so you can mix your effects into the monitors as well as the main outputs.

Built Mackie Tough

All PPM mixers boast a rugged composite-molded case, which scoffs at the kind of abuse that would send those cheap "rat-fur-covered" wooden boxes crying for mama. We've been building state-of-the-art mixers and power amplifiers since day one. So it was just a matter of time, you might even say it was inevitable, that we'd combine the two.

Now you can have it all, Mackie mixer, Mackie digital effects and Mackie power amps, all in one convenient package—the PPM Series.

Features

  • Full featured 8-channel / 1200 watt powered mixer with onboard EMAC™ 32-bit digital effects processor
  • Two 600-watt FR Series High-Current power amps
  • Power amps switchable as mono Mains or Mains + Monitor
  • 8 mic/line channels with master phantom power
  • Two stereo line inputs (on channels 7 and 8)
  • 1/4" and XLR connectors on each input
  • 1/4" Inserts on channels 1-6
  • Two Aux Sends (MON and EFX)
  • Active 3-band EQ on each channel
  • 9-band, audiophile-quality graphic EQ on Main and Monitor outputs

£ 769.64 Web price, inc VAT

Ex Vat:
£641.37, VAT at 20.00%
SRP:
£ 928.34
Select Currency
Order
x £ payments + £ deposit
Read more about finance here.
Image: Mackie PPM 808M

Save 17%

Free Delivery*

Call for availability: 0844 815 0888

FREE NEXT DAY DELIVERY*
More details on UK deliveries.
More details on International deliveries.

Mackie PPM 808M videos

There are currently no videos for this product. If you are registered with us you may log in to add additional videos related to this product. You can also register an account to add a related video.

Mackie PPM 808M Reviews

There are currently no reviews for this product.

Add your review
Security code
Price Matching

Dolphin Music brings you the best music gear at the best price. We are committed to superior customer service and have extensive product knowledge. However, in today’s market we may not always be aware of all the price fluctuations of the products we sell. So, we offer competitive price matching.

Please fill in the following form to request a price match.

What prices we will match?

We will compare prices for new, direct from manufacturer items, excluding any add-ons, options, or other special features which may affect price.

The item must be new and must be the exact same make and model (ie, the same size, version, etc.).

Since our postage charges are lower than most of the shops, the comparison price must be a "delivered cost" to the consumer.

If we are unable to verify the previous condition, we will notify you that we require additional information to verify the Price Match request. Our goal is to make this policy simple and hassle-free. We are committed to responding to your requests quickly.

The price you have found must be the Internet Retailer's regular, advertised price for a current and available item. The price you found cannot be a closeout, discontinued, blemished, year-end, inventory reduction, or any other type of advertised sale price.

Price Matching requests may not be combined with any other promotional discounts, specials or other price incentives.

Prices and price sources you have found which do not meet the above criteria or in which incomplete or inaccurate information is provided to us, will not be approved for our Price Match.

Please select your country/region

Choose the region you are shopping from to view products in your currency.

We have temporarily suspended processing of EUR payments, all orders will be charged in GBP.