This purebred club mixer has truly raised the bar in terms of club audio quality. It’s also quickly become the mixer of choice for many of the world’s greatest DJs, thanks to its pristine sound, its phenomenal VCF filters and its creative 4 band EQ. Club owners – if you want to know how good your big-money speaker system could sound, try it with a Xone:62.

6 Dual Stereo Channels

CH 1&2 have XLR Mic inputs and [TRS] stereo line level inputs, with ‘corrective’ EQ. CH 3-6 have stereo RCA RIAA turntable inputs and stereo RCA line level inputs, plus powerful 4 band ‘music’ EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader. CH 3-6 have X-fade assign section

Stereo Mix Outputs

Balanced mix outputs on XLR with level control, plus secondary RCA ‘music only’ outputs for recording. A post fade [TRS] mono sum output is also provided. The mix signal is displayed on 12 segment 3 colour bar meters

Auxiliary Send

All channels have a stereo auxiliary send which can be individually switched pre or post fade. There is also a post crossfader send to this stereo aux, so a program feed to a zone is possible. The outputs are [TRS] jacks

4 Band EQ

Powerful 4 band EQ with ‘asymmetric’ characteristic on CH 3-6; +6dB boost to preserve headroom and -26dB cut for creative mixing. CH 1&2 have ‘corrective’ EQ for mic & line control. EQ on switches are provided

VCA Cross Fader

Conductive plastic, high quality 45mm Penny & Giles fader with curve switchable to cut or dip. Channels 3-6 can be assigned to X left side or Y right side, with green / yellow led indication. The fader is a VCA design, so wear and tear does not affect audio. Drop-in replacements. Pan trim control for imbalance

Voltage Controlled Filters

2 filters [1 for each side of the x-fader] with choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance - adjusts Q from ‘mild to wild’. Sweep controls from 100Hz to 20kHz with blue led on switch

Engineer / DJ’s Toolbox

High powered headphone output with level. ‘Music only’ Booth output on [TRS] jacks with level. 12 segment 3 colour bar metering displays mix or cue/monitor section. Channel cue overrides the monitor selected in the phones [option for post-EQ on CH 3-6]. Split Cue sends cue signals to left and selected program to right. Mute kills booth monitor output. Booth Mono sum button for phase and compatibility check

PSU

High performance internal switched-mode power supply. Universal mains input voltage

Configuration options

Internal links: individual channel aux sends to pre-EQ and CH 3-6 cue to post-EQ. 9 pin user connector (D-type female) for custom modifications and remotes (require competent installation or service personnel)

Connections

INPUTS 

• CH 1-2 IN (Mic) Balance XLR female (2k ohm -45 to -15dBu)
• (Stereo Line) Unbalanced TRS jack (>10 ohm -15 to +15dBu)
• CH 3,4,5,6 (Phono) RCA phono RIAA (47k ohm/330pF2 to 100mV)  
• (Stereo Line)  RCA phono (>10 ohm >10k to +10dBu)

OUTPUTS 

• MIX OUT L,R (XLR) Balanced XLR male (<75 ohm  +4dBu)
• RECORD OUT RCA Phono (<600 ohm  -10dBV)
• MONO OUT  Impedance balance TRS jack (<600 ohm -2dBu)
• AUX OUT L,R Impedance balance TRS jack  (<75 ohm -2dBu)
• BOOTH OUT Impedance balance TRS jack  (<75 ohm -2dBu)
• HEADPHONES Tip = L Ring = R 30 to 600 ohm recommended  

Mechanical Specs

• Desktop Width 320mm / 12.6" Height 358mm / 14" Depth 118mm / 4.6" Weight 5kg / 11lb
• Rack Ears Fitted Width 370mm / 14.6" Height 358mm / 14"    
• Packed Width 475mm / 18.7" Height 395mm / 15.6" Depth 210mm / 8.3" Weight 5.5kg / 12lb

Technical Specs
  
Technical Specifications

• 0dBu = 0.775 Volts rms +4dBu = 1.23V rms
• 0dBV = 1 Volt rms -10dBV = 316mV rms

Maximum output level

• XLR +26dBu into >2k ohm load
• TRS jack +21dBu into >2k ohm load
• RCA Phono +15dBu into >10K ohm load

Internal headroom

• Channels +21dB
• Mix to output +23dB
• Peak indicators
• Turn on 5dB before clipping

Meters

• MIX /MONITOR  Peak hold 12 LED 3 colour
• STEREO CHANNEL Peak reading 4 LED 3 colour

Frequency response

• 20Hz to 40kHz +0/-1dB

Distortion THD+noise measured at +14dBu 1kHz

• < 0.006%

Crosstalk channel shutoff measured at 1kHz

• < 90dB  

Noise measured rms 22Hz to 22kHz

• MIC EIN -128dB referred to 150 ohm source

Residual output noise

• XLR -90dBu (-94dB S/N)
• TRS jack -84dBu  (-84dB S/N)
• L RCA -92dBu  (-84dB S/N)

Mix noise, ch routed

• XLR -86dBu  (-90dB S/N)
• TRS jack -82dBu  (-82dB S/N)
• RCA Phono -91dBu  (-83dB S/N)

Power Supply Internal switch mode power unit with auto sensing mains input.

• MAINS IN socket IEC 3 pin 
• Power lead Country dependent with moulded mains plug supplied
• AC mains 100 to 240V AC @ 50/60Hz
• Consumption 30W max
• Mains fuse rating 100-240V AC   T500mA   20mm

• Richie Hawtin' Traktor setup

  Ever been interested in how his setup works? Then check out this interview, he explains how Traktor works and how a Kontakt show is structured

• Further Sophistication Added To Xone Mixed In Key Software

  Allen & Heath has announced Version 3.0 of the innovative ‘Xone Mixed in Key’ harmonic mixing software. Using a patent-pending process for key detection, the new version provides even more accurate results - including multiple keys for more variety - and integrates seamlessly with top DJ software.

• NAMM 2007: Allen & Heath Launches Two New Xone Products

  Allen & Heath has chosen the 2007 NAMM show to unveil two new products from its award-winning Xone range.

• NAMM 2007: Allen & Heath Launches Two New Xone Products

  Allen & Heath has chosen the 2007 NAMM show to unveil two new products from its award-winning Xone range.

• Ralph Lawson: Allen & Heath Xone:3D Tips & Tricks Video

  Ralph using the Allen & Heath Xone:3D mixer to control Ableton Live.

• LEADING DJ’S ENDORSE XONE

  Ten of Australia’s leading DJ’s have joined the exclusive worldwide network of Allen & Heath Xone endorsed artists. The arrangement means that local talent is being fully recognised on an international basis and joining an elite group that includes the likes of Sander Kleinenberg, Richie Hawtin and John Digweed.

• TRAKTOR 3 - LIVE AT FABRIC, LONDON

  Together with Allen & Heath, Native Instruments will be celebrating the launch of the new Xone:3D mixing console on 28th June at London's prestigious Fabric venue. We would like to invite you to join in the festivities marking the arrival of this unique DJ product.

• New VF-1 Filter Module Added to Allen & Heath\'s Xone Lineup

  Dolphin Music has just become a Main Dealer for the British Mixer manufacturers Allen & Heath, the first in the North of England. Famous for PA & DJ mixers they have just introduced a new product, part of the Xone range of DJ mix products, the Xone VF-1.