If you’re looking for a whole lot of preamp on a tight budget, you’ll see where this popular product gets its name. Affordability and performance make the Audio Buddy is one of the most popular mic preamps in home recording today. You get professional microphone support along with line inputs impedance-matched for ideal performance with electric guitar and…

The MIC2200 is the ideal extension to your console, MIDI setup or hard disk recording system. Its integrated parametric EQ’s give you extra sound-shaping power, while its built-in tube adds warmth and transparency to your signal. In addition, the ULTRAGAIN PRO features direct injection and level conversion functionality. Features Discrete mic/line input stages with soft mute +48 V…

They say size matters, but sometimes size can be misleading. Under the hood of this small box you’ll find the same technology that we use in our professional audio products. The Phantom Power Supply PS400 enables you to select between two different power supplies with low-noise audio performance. It’s ultra-compact in size but big in features. …

Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there’s a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough rule-of-thumb would be “more is better.” For example, a 24-volt condenser mic usually works perfectly with a…

Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be “more is better.” For example, a 24-volt condenser mic will…

A two channel 24 volt phantom power supply designed to power many types of popular condenser mics. Both channels can be used simultaneously. Powered by three regular PP3 batteries, or re-chargeable batteries which can be charged in situ via the 3.5mm jack socket (which is link-protected), or from an external DC supply. A ‘low-battery’ led illuminates when battery power falls…

AKG phantom power adapter. XLR connector adapts mini XLR micro mics for phantom power.

The B 29 L powers one or two C 4.. L version MicroMic III Series microphones (except for the D 409 L which requires no phantom power). The B 29 L features an on/off switch and status LED as well as a mic/line selector for matching the output level to the input of the connected mixer or recorder, etc. The…

The battery unit supplies one microphone with 48 V phantom powering (P48). The maximum supply current is 5 mA. The audio output is dc-free. Therefore, no transformer is needed when connecting to unbalanced inputs. The cables couple to the BS 48 i through XLR 3 connectors. Maximum length of operation depends on the type of battery and the current drain…

Based on the M-Audio preamp technology that won Pro Audio Review’s highest accolades, the DMP3’s amazing 20Hz to 100kHz frequency response makes it ideal for today’s 96k recording work. You also get exceptional dynamic range to capture all the nuances of your music—not to mention an unbelievable 66dB of gain. And the classic VU meters are just one indication…

Sometimes you need to connect a low-impedance or condenser microphone to something which does not support it, such as a high-impedance mixer input, a PC sound card, a powered speaker or possibly an instrument amp. Situations like this call for a mic preamp like the MicroMIX to act as an interface. Simplicity and economy are important factors. A level control…

The MX32B is a stereo unit designed to mix the signals from three microphones and one of three, switch selectable, mono or stereo A/V sources. Video may be switched together with the audio programme when fitted with the video I/O option. The MX32B is designed for operation by non pro-audio users and so keeps operation as simple as…

The MX41 is designed to mix the signals from four microphones and one of two music sources into two independently controlled zone outputs. Each of the four microphone inputs is balanced on XLR's and has a volume control and individual phantom power switching. Microphone inputs one and two have priority over the other two inputs and the music source. The…

The PM4 is designed to provide a phantom power interface between a mixer and condenser lavalier or headset mics like our Qe and Qv. Special interface enables a mixer to provide phantom power to condenser microphones Lockable mini-XLR input Transformer balanced XLR output Durable metal housing Belt clip …

Mains powered, this unit offers 4 channels of rock-solid 48 volt phantom power, with a ‘phantom present’ led and a rear panel ground lift. It is without doubt the best value for money phantom power supply available. See also the PPS-2 below. Specifications Inputs: Balanced XLR 48v Pins 2&3. Outputs: Balanced Male XLR. Input Level: 500mV max.…