With added functionality and enhanced audio performance, the AR-133 has been designed to be more affordable for musicians, studios and PA companies. The unit includes phantom power and battery supplies as standard. Should the phantom power from the console fail or be accidentally switched off, the AR-133 automatically switches over to the internal 9V battery providing uninterrupted use. The unit…

The ULTRA-DI PRO DI800 is a professional mains/phantom powered 8-channel DI-box. It converts unbalanced line inputs into balanced outputs, featuring optional mains or phantom powered operation. Its servo balanced operation assures ultra-flat frequency response. Additionally, it allows direct connection to speaker outputs with up to 3,000 Watts. A ground lift switch as well as input attenuation/gain per channel round off…

ULTRA-G GI100: Your secret weapon for direct sound. 

Whether you’re recording or on stage, you need a reliable DI box to get your guitar sound to the console with full dynamics and power—and without noise. Engineered for electric guitar, our GI100 features a switchable speaker simulation designed by Juergen Rath that so realistically emulates a 4 x 12" cabinet you…

The DI4000 gives you four first-class DI channels in one rack space. With two inputs (XLR and 1 /4 " TRS), a balanced output (XLR) and a 1 /4 " link output per channel, up to 40 dB of switchable input attenuation and up to 20 dB of gain, the DI4000 is equipped to deal with virtually any input…

The Radial SGI studio guitar interface allows a guitar signal to travel 100 meters (328 feet) over a standard balanced XLR mic cable. This enables the guitarist to play through a distant amplifier while listening to the performance in the control room. On large stages, the SGI allows a guitar signal to travel from the wireless system to a pedal…

Not every instrument is made to connect directly to a mixer. Guitars and basses have a lower output signal level, and their output is not balanced. If you plug them straight into a mixer, you have to jack the preamp level to the max just to get a quiet, wimpy sound. Most keyboards have unbalanced outputs, which means if you…

The HotShot™DM-1 is an innovative a combination microphone signal splitter and mute switch that allows the user to depress a foot switch to mute his mic and redirect the signal to the monitoring system or intercom for on-stage communication with band-mates and technicians.

Designed specifically for dynamic microphones, the DM-1 HotShot is a simple passive device…

Use the TAPCO DB-1B passive DI box to connect your guitar or bass directly to your mixer - without losing tone due to impedance mismatches, low levels, and 60-cycle hum. Thru/Out jack lets you send a clean signal to a mixer, plus an onstage amplifier, for greater control during live performance. Available in passive and active models. …

A single channel very high quality passive D.I. box, housed in the same all steel box used for our active models. It features a jack input socket, and link output for connection to an on-stage combo etc. Two wide band low distortion transformers provide a balanced 600 ohm output to an XLR. A ground lift switch is…

The DI-2 is a two channel DI box, for use with stereo keyboards or two separate mono signals. It can also be used as a balanced signal splitter by connecting a short jack-to-jack lead from the link socket of channel 1 to the input of channel 2. Channel 1's signal will then be available on both balanced XLR's,…

Two channel, very high quality passive D.I. box, housed in the same all steel box used for our active models. It features a jack input socket, and link output for connection to an on-stage combo etc. Two wide band low distortion transformers provide a balanced 600 ohm output to an XLR. A ground lift switch is fitted, and the unit…

The DI-3 single channel D.I. box has a mono jack input and link out socket, a ground lift to eliminate hum loops, a three position attenuator for accurate level matching, and a balanced 600 ohm XLR output. All models can be powered by a 9 volt battery, phantom power from the desk, or an external 9v psu. …

A compact and convenient solution to Direct Injection, the DI-6M offers six D.I. channels in a 1u rackmount, with the added bonus of a six channel mixer, output to a balanced 600W XLR socket. Each channel has an overload led, very accurate and flexible attenuation, an individual ground lift, and a link output socket to an on-stage combo etc., while…

The Di2 is a single channel Active DI housed in a tough extruded aluminium case, which may be powered from Phantom Power, or by two internal PP3 batteries. Low power consumption circuitry extends battery life up to 300 hours. Unintentional battery drain is avoided through use of automatic Phantom Power detection and automatic power shut-off on disconnection of the…

The Radial JDI Duplex Mk4 is a full-featured passive DI designed to enhance connectivity for the touring professional and AV integrator. The Duplex comes equipped with 1/4" connectors for -10dB consumer electronics and XLR inputs for +4dB professional line sources.

Each Duplex channel employs the same high-performance Jensen audio transformer as the industry standard Radial JDI direct…