Dolphin id:4549 Product SKU:AHPA20
The PA20 mixer has been designed with all the tools you will need to run a standard stereo PA system. These entry level consoles makes an ideal live mixer for club performers, schools' systems, conference rooms and travelling musicians.
The PA20 mixer has been designed with all the tools you will need to run a standard stereo PA system. With ALLEN&HEATH's legendary innovative design and excellent sound quality, these entry level consoles makes an ideal live mixer for club performers, schools' systems, conference rooms and travelling musicians. If you care about quality you’ll also appreciate the build standards that the PA series conforms to, including the same individual vertical circuit boards, nutted pots and solid copper buss interconnection as our acclaimed ML series consoles. As for audio performance, PA20 mixers have the wonderfully full, open, natural quality that you’d expect from a professional ALLEN&HEATH desk.
16 mono channels with Mic [XLR] & Line [TRS] inputs. Line input overrides the XLR input. Individual +48V phantom power switches are provided. New padless two-stage preamp with smooth gain law. Line input goes to second stage for better matching and performance. Switched 100Hz high pass filter. Insert point. 4 band EQ. 4 aux mixes. Mute with LED. PFL button with LED [functions as peak indicator]. 100mm fader.
4 Band EQ
Shelving LF [60Hz], and HF [12kHz]. Fixed LM [250Hz], and swept HM [300Hz - 6kHz]. The fixed 250Hz control has been carefully selected to provide reduction of ‘muddy’ sounds and enhance ‘warmth’
Dual Stereo Channels
Two stereo channels with two unbalanced stereo inputs on each. One is RCA one is TRS jack. Independent gain controls provide source mixing in the channel strip. The top inputs [RCA] can be switched direct to L&R instead of the channel strip providing extra returns. Two band shelving EQ. 4 aux mixes. Stereo balance, mute with LED, PFL with LED, and 100mm fader as mono channels.
4 Auxiliary Sends
From all channels: 2 pre-fade for foldback mixes - these have 100mm fader masters, mute switch with LED, AFL with LED, and TRS outputs [can be routed internally to output section]. 1 post-fade aux mix for FX - this feeds the internal FX and has a TRS jack output for external FX. 1 post-fade aux mix to TRS jack output is provided for external FX or special feeds.
Main stereo mix output has 100mm fader control & mute with LED. TRS jack outputs. Mono sum output with level control with switch for subwoofer mode to TRS jack. Record output [RCA] analogue + SPDIF switchable pre/post fader. Twin 12 segment LED bar meter shows program [or PFL /AFL]. Insert points on TRS jack for external processing. Output EQ and routing to internal amplifiers / external systems is provided.
4 band semi-parametric EQ is provided in the output section, this affects the TRS slave outputs, and the internal constant power amplifiers. This offers more control than graphic equalisers for precise management of speakers, especially foldback / monitors. Source selector allows output EQ section to be used on Left / right, L&R sum / foldback1, or foldback1 / foldback2.
16 program digital FX processor provides reverbs, delays, chorus and others, inc combined. This FX module takes its feed from the post-fade FX aux on the mono & stereo channels. The output of the FX module is controlled by a 100mm fader with mute & PFL and is routed to the stereo mix and FB1&2 with post fade level controls. At this point, 2 TRS inputs with level control provide a way of combining external FX with the internal unit. Internal FX unit can be switched off to use external only if preferred. A footswitch TRS jack is provided to mute the FX channel. Editing of FX can be done via MIDI using ALLEN&HEATH software editor available free from resource CD or our website.
Background music BGM mode - plays 2 track input into the main mix post fader, allows user to pull down fader (whilst patching, taking a break, or during walk-in) and leave music playing through the amplifiers / speakers. 2 track input [RCA] with level control to L&R - feeds headphone monitor selector [checking recording]. Twin, 3 colour 12 segment LED meter displays active monitor source. Large LED indicates PFL / AFL active - signal overrides L&R / 2TRK monitor source selection. Standby switch uses relays to disconnect the speakers. 2 track output [RCA] analogue + SPDIF allows direct to digital recording. Switchable pre / post master L&R fader. Mono sum out with level [TRS] - mode switch to provide sub feed with 100Hz low pass filter. Phones out [TRS] with level.
Solid & reliable internal PSU. 1600W design.
4-pin XLR socket
Width - 733 mm (28.9”)
Height - 178 mm (7.0”)
Depth - 539 mm (21.2”)
Weight - 17 kg (37 lbs)
Dolphin Music brings you the best music gear at the best price. We are committed to superior customer service and have extensive product knowledge. However, in today’s market we may not always be aware of all the price fluctuations of the products we sell. So, we offer competitive price matching.
Please fill in the following form to request a price match.
We will compare prices for new, direct from manufacturer items, excluding any add-ons, options, or other special features which may affect price.
The item must be new and must be the exact same make and model (ie, the same size, version, etc.).
Since our postage charges are lower than most of the shops, the comparison price must be a "delivered cost" to the consumer.
If we are unable to verify the previous condition, we will notify you that we require additional information to verify the Price Match request. Our goal is to make this policy simple and hassle-free. We are committed to responding to your requests quickly.
The price you have found must be the Internet Retailer's regular, advertised price for a current and available item. The price you found cannot be a closeout, discontinued, blemished, year-end, inventory reduction, or any other type of advertised sale price.
Price Matching requests may not be combined with any other promotional discounts, specials or other price incentives.
Prices and price sources you have found which do not meet the above criteria or in which incomplete or inaccurate information is provided to us, will not be approved for our Price Match.