Following a tradition of great bass guitars that included the popular EB series, as played by Jack Bruce and others, Gibson thoroughly redesigned its take on the low end in the 1970s to address the increased power, punch and fidelity required by the rock, funk and pop music of the day. The result was the Grabber, an electric bass with superb playability and unprecedented cutting power.
Gibson Grabber 3 '70s Tribute Bass - Satin Honeyburst
Grab a hold of your low end with some 70's mojo, the Grabber 3 was in production from 1973-75 and made quite a name for itself. Gibson haven't settled on simply revisiting a classic with improvements made using a glued in neck and newly designed pickups.
The foundation of the Grabber 3 ’70s Tribute Bass’s eviscerating punch is found in a departure from traditional Gibson tonewoods. The thin body is crafted from solid maple (Grade A beneath the burst finish, Grade C beneath the opaque) and carved in a double-cutaway shape with contoured edges reminiscent of the classic SG but also totally original as well. A glued-in Grade-A maple neck with a satin natural finished back is carved in a slim, fast profile that measures .820” at the 1st fret and .920” at the 12th. It is topped with a baked maple fingerboard that offers a rich brown appearance, enhanced tonal clarity, and excellent durability with easy playing access right up to the 20th fret thanks to the deep body cutaways. The headstock follows the “arrowhead” shape of the original Grabber, reminiscent of Gibson’s earlier Flying V guitar, and features four chunky Grover™ tuners with Shamrock keys. A PLEK-cut Corian™ nut, as well as Plek dressed frets insures maximum playability. Finally, optimum sustain and precise intonation are ensured by Gibson’s meaty three-point adjustable bass bridge, a sturdy design that provides an ultra-solid anchor at the body end.
Gibson Grabber 3 Tone
With a solid tonal foundation assured, the Grabber 3 ’70s Tribute Bass rams it all home through three pickups of an entirely new design from Gibson USA. The G3 Bass pickups are single-coil units made with genuine Alnico V magnets for optimum clarity and cutting power, and impressive fidelity throughout the instrument’s frequency range. A clever wiring scheme through the simple array of a three-way switch and master volume and tone controls assures that these units—with a reverse-wound, reverse-polarity middle pickup—offer hum-canceling performance in all positions. The “switch up” position gives you the neck and middle pickups for a rich, woody tone. The middle position taps all three pickups for a round, funky tone. And with the switch down, the bridge and middle pickups offer a punchy, snappy sound.
Gibson Grabber 3 '70s Tribute Bass Specs:
- Species: Maple
- Species: Maple
- Profile: Slim, Fast
- Truss Rod: Traditional Adjustable
- Species: Baked Maple
- Frets: 20
- Scale Length: 34"
- Tuners: Grover™ Bass with Shamrock Keys
- Bridge: 3-Point Adjustable
- Pickups: G3 Bass (Alnico V)
- Potentiometers: 1 Volume Control 1 Tone Control