0151 448 2080
Order by phone - Mon-Fri: 9:00AM-6:00PM

Select CurrencyYour Basket 0 items | £ 0.00 Checkout

Can't wait to try? why not visit one of our 14 PMT House of Rock sister stores

Allen & Heath Xone:62

Dolphin id:3437 Product SKU:AHZONE62

This product is currently not available for purchase.

This purebred club mixer has truly raised the bar in terms of club audio quality. It’s also quickly become the mixer of choice for many of the world’s greatest DJs, thanks to its pristine sound, its phenomenal VCF filters and its creative 4 band EQ.

Show full description »

This purebred club mixer has truly raised the bar in terms of club audio quality. It’s also quickly become the mixer of choice for many of the world’s greatest DJs, thanks to its pristine sound, its phenomenal VCF filters and its creative 4 band EQ. Club owners – if you want to know how good your big-money speaker system could sound, try it with a Xone:62.

6 Dual Stereo Channels

CH 1&2 have XLR Mic inputs and [TRS] stereo line level inputs, with ‘corrective’ EQ. CH 3-6 have stereo RCA RIAA turntable inputs and stereo RCA line level inputs, plus powerful 4 band ‘music’ EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader. CH 3-6 have X-fade assign section

Stereo Mix Outputs

Balanced mix outputs on XLR with level control, plus secondary RCA ‘music only’ outputs for recording. A post fade [TRS] mono sum output is also provided. The mix signal is displayed on 12 segment 3 colour bar meters

Auxiliary Send

All channels have a stereo auxiliary send which can be individually switched pre or post fade. There is also a post crossfader send to this stereo aux, so a program feed to a zone is possible. The outputs are [TRS] jacks

4 Band EQ

Powerful 4 band EQ with ‘asymmetric’ characteristic on CH 3-6; +6dB boost to preserve headroom and -26dB cut for creative mixing. CH 1&2 have ‘corrective’ EQ for mic & line control. EQ on switches are provided

VCA Cross Fader

Conductive plastic, high quality 45mm Penny & Giles fader with curve switchable to cut or dip. Channels 3-6 can be assigned to X left side or Y right side, with green / yellow led indication. The fader is a VCA design, so wear and tear does not affect audio. Drop-in replacements. Pan trim control for imbalance

Voltage Controlled Filters

2 filters [1 for each side of the x-fader] with choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance - adjusts Q from ‘mild to wild’. Sweep controls from 100Hz to 20kHz with blue led on switch

Engineer / DJ’s Toolbox

High powered headphone output with level. ‘Music only’ Booth output on [TRS] jacks with level. 12 segment 3 colour bar metering displays mix or cue/monitor section. Channel cue overrides the monitor selected in the phones [option for post-EQ on CH 3-6]. Split Cue sends cue signals to left and selected program to right. Mute kills booth monitor output. Booth Mono sum button for phase and compatibility check


High performance internal switched-mode power supply. Universal mains input voltage

Configuration options

Internal links: individual channel aux sends to pre-EQ and CH 3-6 cue to post-EQ. 9 pin user connector (D-type female) for custom modifications and remotes (require competent installation or service personnel)



  • CH 1-2 IN (Mic) Balance XLR female (2k ohm -45 to -15dBu)
  • (Stereo Line) Unbalanced TRS jack (>10 ohm -15 to +15dBu)
  • CH 3,4,5,6 (Phono) RCA phono RIAA (47k ohm/330pF2 to 100mV)  
  • (Stereo Line)  RCA phono (>10 ohm >10k to +10dBu)


  • MIX OUT L,R (XLR) Balanced XLR male (<75 ohm  +4dBu)
  • RECORD OUT RCA Phono (<600 ohm  -10dBV)
  • MONO OUT  Impedance balance TRS jack (<600 ohm -2dBu)
  • AUX OUT L,R Impedance balance TRS jack  (<75 ohm -2dBu)
  • BOOTH OUT Impedance balance TRS jack  (<75 ohm -2dBu)
  • HEADPHONES Tip = L Ring = R 30 to 600 ohm recommended  

Mechanical Specs

  • Desktop Width 320mm / 12.6" Height 358mm / 14" Depth 118mm / 4.6" Weight 5kg / 11lb
  • Rack Ears Fitted Width 370mm / 14.6" Height 358mm / 14"    
  • Packed Width 475mm / 18.7" Height 395mm / 15.6" Depth 210mm / 8.3" Weight 5.5kg / 12lb

Technical Specs
Technical Specifications

  • 0dBu = 0.775 Volts rms +4dBu = 1.23V rms
  • 0dBV = 1 Volt rms -10dBV = 316mV rms

Maximum output level

  • XLR +26dBu into >2k ohm load
  • TRS jack +21dBu into >2k ohm load
  • RCA Phono +15dBu into >10K ohm load

Internal headroom

  • Channels +21dB
  • Mix to output +23dB
  • Peak indicators
  • Turn on 5dB before clipping


  • MIX /MONITOR  Peak hold 12 LED 3 colour
  • STEREO CHANNEL Peak reading 4 LED 3 colour

Frequency response

  • 20Hz to 40kHz +0/-1dB

Distortion THD+noise measured at +14dBu 1kHz

  • < 0.006%

Crosstalk channel shutoff measured at 1kHz

  • < 90dB  

Noise measured rms 22Hz to 22kHz

  • MIC EIN -128dB referred to 150 ohm source

Residual output noise

  • XLR -90dBu (-94dB S/N)
  • TRS jack -84dBu  (-84dB S/N)
  • L RCA -92dBu  (-84dB S/N)

Mix noise, ch routed

  • XLR -86dBu  (-90dB S/N)
  • TRS jack -82dBu  (-82dB S/N)
  • RCA Phono -91dBu  (-83dB S/N)

Power Supply Internal switch mode power unit with auto sensing mains input.

  • MAINS IN socket IEC 3 pin 
  • Power lead Country dependent with moulded mains plug supplied
  • AC mains 100 to 240V AC @ 50/60Hz
  • Consumption 30W max
  • Mains fuse rating 100-240V AC   T500mA   20mm
Image: Allen & Heath Xone:62

Free Delivery*


More details on UK deliveries.
More details on International deliveries.

Allen & Heath Xone:62 videos

There are currently no videos for this product. If you are registered with us you may log in to add additional videos related to this product. You can also register an account to add a related video.

Allen & Heath Xone:62 Reviews


top class mixer

this is easily the best mixer i have ever used i have used many mixers in my time from numark to pioneer and find this the best for several reasons 1 is has the best sound quality you will ever hear 2 it is a pure raw top class mixer with none of the fancy extra\'s you find on other mixers 3 the 4 band eq it top class and elevates your mixes 4 it is so easy to use the price might seem heavy but once you have used this mixer you will agree it is worth every single penny


allen and heath xone 62

for all who want to buy a new mixer. the xone 62 was for me a unbelieveble suprise. working with the xone 62 is a new dimension in sound und a very exact way to controll the sound with the equalizer. the xone 62 is worth the money in all kinds. this is profeesional equipment. the shipment to germany was fast and easy.

Add your review
Security code
Price Matching

Dolphin Music brings you the best music gear at the best price. We are committed to superior customer service and have extensive product knowledge. However, in today’s market we may not always be aware of all the price fluctuations of the products we sell. So, we offer competitive price matching.

Please fill in the following form to request a price match.

What prices we will match?

We will compare prices for new, direct from manufacturer items, excluding any add-ons, options, or other special features which may affect price.

The item must be new and must be the exact same make and model (ie, the same size, version, etc.).

Since our postage charges are lower than most of the shops, the comparison price must be a "delivered cost" to the consumer.

If we are unable to verify the previous condition, we will notify you that we require additional information to verify the Price Match request. Our goal is to make this policy simple and hassle-free. We are committed to responding to your requests quickly.

The price you have found must be the Internet Retailer's regular, advertised price for a current and available item. The price you found cannot be a closeout, discontinued, blemished, year-end, inventory reduction, or any other type of advertised sale price.

Price Matching requests may not be combined with any other promotional discounts, specials or other price incentives.

Prices and price sources you have found which do not meet the above criteria or in which incomplete or inaccurate information is provided to us, will not be approved for our Price Match.

Please select your country/region

Choose the region you are shopping from to view products in your currency.

We have temporarily suspended processing of EUR payments, all orders will be charged in GBP.