The Ultra-DI DI20 is an innovative active 2-channel DI-box/splitter that takes the signal directly from an unbalanced high-impedance output—like an electric guitar—and feeds it directly into a mixing console or recorder. It is ideally suited to augment the traveling gear of musicians (especially guitar/bass players) as well as live/studio/broadcast engineers, installation contractors and studios/live event engineers. The DI20 converts…

With the DI100, you can rest assured that your sound source will reach your console balanced and noise-free. Go ahead and plug that guitar amp's speaker output into the ULTRA-DI—it’ll deal with ratings of up to 3,000 Watts and give you a perfect signal at the other end. The input-buffering amplifier ensures clean, pure and powerful sound, even with extremely…

There are times when you will want to connect certain sound sources straight to other audio gear, be it for a live performance or a studio session. A direct connection between audio equipment can be a challenge though: technical problems crop up that’ll corrupt the signal. The DI400P lets you connect instruments or amplifier outputs. It converts…

The Xdirect is a high quality interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input. The high impedance single-ended 1/4” and XLR inputs are buffered and converted, by very low noise active electronics, into an isolated balanced low impedance signal source. The Xdirect has an extremely flat and wide frequency response…

The DI4000 gives you four first-class DI channels in one rack space. With two inputs (XLR and 1 /4 " TRS), a balanced output (XLR) and a 1 /4 " link output per channel, up to 40 dB of switchable input attenuation and up to 20 dB of gain, the DI4000 is equipped to deal with virtually any input…

ULTRA-G GI100: Your secret weapon for direct sound. 

Whether you’re recording or on stage, you need a reliable DI box to get your guitar sound to the console with full dynamics and power—and without noise. Engineered for electric guitar, our GI100 features a switchable speaker simulation designed by Juergen Rath that so realistically emulates a 4 x 12" cabinet you…

The S-direct plus gives you all the same features of the original S-direct, but in stereo. It's like having two direct boxes in one, perfect for keyboard players, or any instrument with multiple outputs. Stereo direct box 1/4" linked inputs/outputs 48 volt phantom power or 9 volt operation with auto battery shut off…

The Zdirect is a high quality totally passive interface that lets you connect instrument, line, or speaker level signals to a mixer or other balanced input thru a high performance audio isolation transformer. The high impedance single-ended 1/4” input is converted by the transformer into an isolated balanced low impedance signal source. The Zdirects audio transformer has an extremely…

“Hum” in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via grounds, more commonly called “ground loops”. The safest way to eliminate unwanted noise is with the CleanBOX II. Some examples of…

As a regular feature of a club sound system or as a durable road piece the S-Direct is the only direct box you'll ever need. Perfect for stage and studio Switchable input level handles instrument and speaker levels 48 Volt phantom power or 9 volt operation with auto battery shut off Switchable ground lift 1/4"…

The DI-2 is a two channel DI box, for use with stereo keyboards or two separate mono signals. It can also be used as a balanced signal splitter by connecting a short jack-to-jack lead from the link socket of channel 1 to the input of channel 2. Channel 1's signal will then be available on both balanced XLR's,…

Adapting from Balanced to Unbalanced and Vice-Versa: Problem: You have a stereo output from a CD player (tape deck, VCR, computer sound card or other consumer electronics gear) and you need to connect it to the balanced line inputs of your mixer (EQ or other piece of professional audio equipment). Actually, there are three problems: 1.) Your source…

The Radial X-Amp is an active re-amping device that presents the engineer / producer with a new and innovative creative tool that allows a pre-recorded track from a line level device to drive two guitar amplifiers or effect pedals simultaneously. This opens the door to explore new musical sounds and spur on the creative…

A single channel very high quality passive D.I. box, housed in the same all steel box used for our active models. It features a jack input socket, and link output for connection to an on-stage combo etc. Two wide band low distortion transformers provide a balanced 600 ohm output to an XLR. A ground lift switch is…

Two channel, very high quality passive D.I. box, housed in the same all steel box used for our active models. It features a jack input socket, and link output for connection to an on-stage combo etc. Two wide band low distortion transformers provide a balanced 600 ohm output to an XLR. A ground lift switch is fitted, and the unit…