If you’re looking for a whole lot of preamp on a tight budget, you’ll see where this popular product gets its name. Affordability and performance make the Audio Buddy is one of the most popular mic preamps in home recording today. You get professional microphone support along with line inputs impedance-matched for ideal performance with…

They say size matters, but sometimes size can be misleading. Under the hood of this small box you’ll find the same technology that we use in our professional audio products. The Phantom Power Supply PS400 enables you to select between two different power supplies with low-noise audio performance. It’s ultra-compact in size but big in features. …

Different condenser microphones specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to your mic. A rough rule of thumb would be “more is better.” For example, a 24-volt condenser mic will…

The MIC2200 is the ideal extension to your console, MIDI setup or hard disk recording system. Its integrated parametric EQ’s give you extra sound-shaping power, while its built-in tube adds warmth and transparency to your signal. In addition, the ULTRAGAIN PRO features direct injection and level conversion functionality. Features Discrete mic/line input stages with soft mute +48 V…

The S-phantom gives you an in the field, on location solution for powering your condenser microphones that need 48 volt power 2 Channel 48 Volt phantom power supply 2 Balanced XLR mic inputs 2 Balanced XLR and 1/4” mic outputs AC adapter included

The MZA 900 P phantom power adaptor is used to connect pre-polarized condenser microphones with a 3.5mm jack plug to microphone inputs with 10 – 52 V phantom powering (P12 – P48). The connected microphone is supplied via the adaptor. The adaptor is also a quick and flexible solution if a microphone is to be used for both wired and…

AS A SPLITTER: The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone.
Applications include sending the direct output to the main or FOH mixer, and the second isolated output to a monitor or recording mixer. The MAIN MIC OUTPUT passes phantom power from the main mixer to the MAIN MIC INPUT for…

The DPA PPC4000 is able to test if you have enough phantom power voltage to drive your condenser microphones without changes in their specifications. Furthermore you can use it as a cable tester to e.g. your stage box. The functions are as follows Green light: Only voltage on pin 3. Core 2 is probably broken. Red light: Only…

AKG phantom power adapter. XLR connector adapts mini XLR micro mics for phantom power.

The B 29 L powers one or two C 4.. L version MicroMic III Series microphones (except for the D 409 L which requires no phantom power). The B 29 L features an on/off switch and status LED as well as a mic/line selector for matching the output level to the input of the connected mixer or recorder, etc. The…

Based on the M-Audio preamp technology that won Pro Audio Review’s highest accolades, the DMP3’s amazing 20Hz to 100kHz frequency response makes it ideal for today’s 96k recording work. You also get exceptional dynamic range to capture all the nuances of your music—not to mention an unbelievable 66dB of gain. And the classic VU meters are just one…

Sometimes you need to connect a low-impedance or condenser microphone to something which does not support it, such as a high-impedance mixer input, a PC sound card, a powered speaker or possibly an instrument amp. Situations like this call for a mic preamp like the MicroMIX to act as an interface. Simplicity and economy are important factors. A level control…

Condenser microphones usually specify different requirements for their phantom power. These ratings can range from 48 Volts all the way down to 9 Volts. Fortunately, there’s a certain amount of flexibility with matching Phantom Power voltage to your mic. A rough rule-of-thumb would be “more is better.” For example, a 24-volt condenser mic usually works perfectly with a…

Mains powered, this unit offers 4 channels of rock-solid 48 volt phantom power, with a ‘phantom present’ led and a rear panel ground lift. It is without doubt the best value for money phantom power supply available. See also the PPS-2 below. Specifications Inputs: Balanced XLR 48v Pins 2&3. Outputs: Balanced Male XLR. Input Level: 500mV max.…