1/2 Wave Dipole Antenna for U4S, U4D and UC4 Recievers - 774-865MHz

This completely reversible transformer matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The transformer permits use of very long microphone cables with either low-impedance or high-impedance microphones. The only requirement is to limit the cable to 4.6 m (15 ft) between the high-impedance end of the transformer and the low-impedance microphone or microphone input. The transformer…

Rack tray for up to two shure receivers.

Pelican Protector® Foam padded, matte black carrying case for one or two LX, SC, T, UC or UT wireless systems

Protective Carrying Case for WL50 and WL51 Microphones, Black

Remote Antenna Extension Cable BNC to BNC, RG213 type, 100 foot (30m) - for: SLX4 ULXS4 ULXP4 UC4 U4S U4D

The Shure UA870 is an active UHF wireless directional antenna featuring a log periodic dipole array. When compared to an omnidirectional 1/2-wave antenna, the cardioid pattern provided by the UA870 offers enhanced reception of the desired coverage area and greater rejection of RF signals outside the coverage area. To compensate for coaxial cable signal loss, the UA870 has…

 In-Line Power Supply (230V AC) for 200M, FP22, FP24, FP33, P4M, P4T, SLX4, PG4, PG88.

Shure Power Supply for  LX3/LX4/ULX4/UC4/SLX4 recievers

Replacement guitar adaptor cable for Shure wireless belt-pack transmitters.

Economy low- to high-impedance microphone matching transformer provides 24 dB of voltage gain and may be used in reverse.

A85F - Line Matching Transformer, Low Impedance Female XLR to High Impedance 1/4-inch Phone Plug

The Shure Model UA844 is a UHF antenna distribution system that allows the expansion of wireless microphone systems by splitting one pair of antennas to multiple receivers. It also amplifies RF signals to compensate for insertion loss that results from splitting signal power to multiple outputs. A single UA844 system can support up to four wireless receivers. Multiple UA844 systems…

Neoprene Bodypack Belt Pouch for LX1, SC1, SLX1, T1G, T1, U1, UC1, ULX1, UT1 Bodypack Transmitters

Nylon carrying case for wireless 1/2 rack receiver and transmitter systems featuring T3, T4G, T4N, T4V, LX3, LX4, SC4, UC4 and UT4 Receivers.

17-inch Carrying Case for T and UT Performance Gear Wireless Systems