Choosing your Electric Guitar: A Buyers Guide
Here is a quick guide we have put together to help you choose your style of electric guitar.
Choose your Body Style…
The Gibson Les Paul shape is among the most recognized solid-body electric guitar designs. It was developed in the early 1950s and has become one of the most enduring and popular musical instrument models in the world. Its design has been left virtually untouched for nearly 50 years. View the best Les Paul-style guitars we have in stock!
In mid 1960, the Gibson Guitar Corporation felt that the Les Paul signature model, introduced in 1952, had run its course, and decided to change the design. This new design, with a slim double-cutaway body featuring prominent scarfing around the edges and cutaways, was officially issued in the 1961 model year as a Les Paul signature model. The main idea was to compete with the double cutaway Fender Stratocaster, which gave players easy access to the higher frets. http://en.wikipedia.org/wiki/Gibson_sg
The Stratocaster, often called the ‘Strat’, is a model of electric guitar designed by Leo Fender in the early 1950s. Much of the popularity of the Stratocaster can be attributed to its versatility. The neck, middle, and bridge (in the original manual, labelled “rhythm”, “normal tone”, and “lead”, respectively) pickups provide a wide range of tones. The standard single-coil pickups often found in Stratocasters produce a trebly sound with a high top end and bell-like harmonics.
The Fender Telecaster (aka ‘Tele’) is a dual-pickup, solid-body electric guitar made by Fender. Its simple, yet effective design and revolutionary sound broke ground and set trends in the fields of electric guitar manufacture and popular music. http://en.wikipedia.org/wiki/Fender_Telecaster
Choose your Pick Ups…
A single coil is a type of pickup for the electric guitar. As its name indicates, it is composed of copper wire wrapped in a single coil around a single bar magnet or several rod magnets. Single-coil pickups are most commonly associated with Fender guitars.
A humbucker is a type of electric guitar pickup that uses two coils. Humbuckers have increased output, and because the two coils are of reversed polarity and reverse-wound, noise and interference is essentially ‘canceled out’. Great for full-on rock'n'roll! Les Paul-style guitars traditionally have humbuckers.
Choose your Bridge System…
A tremolo arm, tremolo bar, vibrato bar or whammy bar is a lever attached to the bridge and/or the tailpiece of an electric guitar or archtop guitar to enable the player to quickly vary the tension and sometimes the length of the strings temporarily, changing the pitch to create a vibrato, portamento or pitch bend effect.
The Floyd Rose Double Locking system consists of:
- a lock at nut of the guitar, which prevents the tuning (”machine”) heads from being used and holds the strings taut,
- a “floating bridge”, where the other ends of the strings are also vise-locked (hence, “double-locking”).
The locking system helps to keep the strings in tune while the strings are slackened to a degree which wasn’t possible with older tremolo systems, such as those found on Fender Stratocaster, allowing “dive bombs” (i.e. rapid lowering of the pitch of a note). Since the tuning heads are ineffectual with the lock in place, the Floyd Rose bridge has heads for fine tuning; the guitar is tuned before the lock is put on, then fine tuned afterwards. http://en.wikipedia.org/wiki/Floyd_Rose
Choose your fret board…
From maple to Rosewood there is no one “best” wood. The choice you make should be based upon your application and personal taste or preference.
Chose your neck joint…
This is the point at which the neck is either bolted or glued to the body of the guitar.
Bolt on Neck
This method is used frequently on solid body electric guitars and is considered the easiest neck joint method. Body and neck cross in horizontal plane and are joined using 4 (rarely 6) screws. As screws damage the wood and could put extra stress on it, typically a rectangular metal plate or a pair of metal plates are used to secure the joint and re-distribute the screw pressure evenly. Fender guitars have this type of neck.
Glue in Necks
Set-in neck is a method of guitar (or similar stringed instrument) construction that involves joining guitar neck and body, pressing it tightly together using some sort of adhesive. This yields better connection of neck and body and makes sound waves. Gibson leads the trend for set-in necks with Gibson Les Paul series, opposing Fender that build guitars traditionally with bolt-on necks. The Vintage V100 Les Paul style guitars have all glue in necks, unlike cheaper, lower quality Les Paul copies.
These are designed so that everything from the machine heads down to the bridge are located on the same piece of wood. The sides (also known as wings) of the guitar are then glued to this central piece. Some luthiers prefer this method of construction as it is said to allow better sustain of each note. Some very high-end instruments may not have a neck joint at all, having the neck and sides built as one piece and the body built around it. http://en.wikipedia.org/wiki/Neck-thru
Unmistakably the sound of the ’70s. The Fender ’70s Stratocaster guitar - platform shoes and lava lamp are sold separately! Features Ash body U-shaped neck Fat headstock Bullet truss rod ’70s Fender logo Fender/Schaller Vintage “F” tuning machines and three vintage single-coil pickups Specifications Body Ash Neck Maple, “U” Shape,…
Availability:Normally 7-10 Days
Fender Classic Player Baja Telecaster Guitar (Blonde - Maple)
This customized '50s-style Telecaster guitar has it all! Designed by Master Builder Chris Fleming, with a "dream list" of specs, and built by Fender's Custom Shop craftsmen, with their years of building experience. Features Soft V-shaped neck Custom pickups with four-way switching Knurled chrome knobs "Custom Shop…
Availability:Normally 7-10 Days