0151 448 2080
Order by phone - Mon-Fri: 9:00AM-6:00PM

Select CurrencyYour Basket 0 items | £ 0.00 Checkout

Can't wait to try? why not visit one of our 14 PMT House of Rock sister stores

What is a mixer bus and why do I need them?

Published: Fri October 01, 2004  News Feed

What is a mixer bus and why do I need them?

A bus is basically a path in which you can route one or more audio signals to a particular destination.  Destinations can include groups, auxiliary sends, stereo mix, foldback or monitor.  Commonly busses are used to route channel signals to a master group fader, a multitrack recorder, or the main stereo master fader (or all).

In live sound applications it is favourable to have a number of busses available to use.  This is due to the fact that as audio channels can be bussed together and controlled by one group fader, it frees up the hands of the engineer and gives him/her less faders to have to control on the fly. It should be noted that although the master group fader does have control over the level of the summed audio in the group, the individual levels will remain with the offset set on the channel fader.

In Studio applications, busses can be used to group signals together for recording when there are too many channels of audio for them all to be sent to your multitracker/interface/soundcard.  Busses are also commonly used to create a foldback headphone mix for the musician(s) to listen to.  If you are using a smaller mixing desk for home recording there is not great need for a great number of busses - although it is good to have an auxilliary send and/or in built effects.

Busses in Live Sound

Most commonly used to get control over several sources with a single fader, whether it's the entire kit or all the backing vocals at once. These days the audio often needn't be physically routed to the fader, group controls can be easily setup on digital desks and an increasing number of hybrid desks.

Peavey Mixer Analogue Bus
Peavey 16FX Mixer
with 4 sub groups. Great affordable analogue mixer.
Yamaha Live Mixer

Yamaha 01V96i Digital Mixer. Yamaha are renowned for their digital mixers, if you need a host of bussing options for small to mid size gigs then this is the mixer for you.

Busses For Mixing In The Studio

Analogue summing is a hot topic in studio circles, with many people including Mixerman swearing by it and a others disagreeing. The truth doubtless exists somewhere between the two and taking separate stems out of the digital world and recombining them on an analogue bus will definitely give a certain character. Especially if you use the same mix bus that pros have relied on for hit records over the past 30+ years.

SSL X-Desk

The SSL X-Desk brings analogue character to the digital realm, the same signal path that features on their legendary mix desks.

If you want some of that same sonic quality in the digital realm then there's a number of options. Both Reason and Cubase have introduced analogue style mixers to their interface, providing that certain analogue something to your digital tracks.

Reason Mixer Cubase Mixer

Bus Compression

Another popular use for busses is parallel processing, simply take your drums, vocals or entire mix and send it to two stereo busses. Apply any effect you like (compression is popular) and tinker to your hearts content, keeping the clean, unprocessed bus alongside it. This allows you to apply extreme FX and processing without losing definition and dynamics.

Here's a fantastic and in depth explanation from James Wiltshire of the Freemasons, who uses a lot of parallel processing in Reason.

Now if we're going to do this properly then we want a nice compressor to work with, so why not try a tasty valve compressor?


Please select your country/region

Choose the region you are shopping from to view products in your currency.

We have temporarily suspended processing of EUR payments, all orders will be charged in GBP.

Please select your country/region

Choose the region you are shopping from to view products in your currency.